Shot #1:
Pick up your camera and walk outside onto your front steps, breezeway, or whatever. Just get outside. Set your camera's Exposure Mode to Aperture Priority (for most cameras, this means turning the dial on top to "A"). Now, set your aperture to f/5.6. Find something nearby to focus on, about 3 or 4 feet away. I used the broken flag bracket on my front porch. Make sure that whatever's in the background is decently far away, like your neighbors house or a tree across the street.
Next, look at your shutter speed. To avoid screwing with more settings later, we want it to be about 125 right now. If its lower than that, gradually increase the ISO setting on your camera until you end up somewhere between 100 - 160 on shutter speed. If your shutter speed is higher than that, gradually step down your ISO until you get in that range. Just to get you in the ballpark, if its bright and sunny outside your ISO will probably be 100 or 200. If its cloudy or moving on towards dusk, it might be 400, 800 or maybe even 1600.
Reframe your shot, focus on the nearby object you chose, and pull the trigger.
Shot #2:
Change your aperture to f/16. Reframe, focus on the same nearby object, shoot again. That's it!
Now compare Shot #1 vs. Shot #2. Notice that the nearby object (my flag bracket) is equally in focus in both images. But look at the difference for the far away objects in the background. They are blurry in the first shot, taken at f/5.6 (shallow depth-of-field). They are much sharper in the second shot, taken at f/16 (deep depth-of-field). Congrats, you now understand aperture's effect on depth of field!
Shot #3:
Turn around, open your door, and take a shot into your house. Its much darker inside, so you should hear your shutter take its sweet time opening and closing. Look at the picture and zoom in. See how blurry everything is? This is because you are hand-holding the camera at a very slow shutter speed. What you're seeing is the dreaded "camera shake"!
Shot #4:
Walk back outside. Set your camera's Exposure Mode to Shutter Priority ("S"). Set your shutter speed to 500 (1/500th of a second). Hold out your free hand and focus on it. Now pull your hand back, and swing it slowly through the frame. Shoot when you see your hand in the middle of the viewfinder. Check your shot. See how your hand is frozen in place? (If it's not, you were pretending to pitch a fastball, so slow down and try again.)
Shot #5
Set your shutter speed to 125 (1/125th of a second) and do that thing with your arm again. Swing it the same speed, shoot when it hits the middle. See how your hand is all blurry? Now you understand how shutter speed effects moving objects. Fast shutter speed = frozen in place. Slow shutter speed = movement looks blurry. Two more to go!
Shot #6
Set your camera's exposure mode to Program Mode ("P"). Change your ISO to 1600. Shoot something, subject isn't as important this time.
Shot #7
Dial your ISO down to 100. Reshoot the exact same shot.
Compare shots #6 and #7. Zoom in allll the way on the same area in both shots. See the grainy speckles in shot #6 (ISO 1600)? That's noise. See how much smoother everything is in shot #7 (ISO 100)? Now you understand the affect of ISO on image quality!
DONE!
No comments:
Post a Comment